Search Results

Search found 12980 results on 520 pages for '11 04'.

Page 14/520 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• How to reload UBUNTU11.04 again which is hidden in the hard disk

  - by Yaskadeva

  I had installed Ubuntu 11.04 as another OS ( not inside Windows). means every time i used to get a Ubuntu screen and i can select Ubuntu or windows. but once i formatted my windows. after that the 38 gb memory which was used under Ubuntu is missing means the ubuntu is there and as it is EXT type windows is not able to access that. and i am not able to boot into it.I need ubuntu i can install new version but my memory is being wasted i do not kno what to do. pl reply me asap.

  Read the article

• Installed UBUNTU12.04 in Legacy, when changed to UEFI just runs the Terminal, not GUI

  - by jraulvc

  Well, I installed Ubuntu 12.04 in a Gateway NE 522 with Windows 8. First, I had to install it in Legacy mode, because in UEFI it would not run the bootable USB. In the Legacy mode it runs perfect. Once done that with help of the "Boot-Repair" I changed it to the UEFI and disabled the secure boot mode. GRUB runs fine but when I run ubuntu I get the following message: microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin kvm: disabled by bios kvm: disabled by bios kvm: disabled by bios and then I just get access to the terminal. From there, I have already tried with reinstalling unity and gmd. When I try to install amd64-microcode the same error ocurrs ( microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin ) by the "updating the microcode on all online processors..." phase of the installation. Can somebody tell me how can I recover the graphical interphase of ubuntu from the terminal? Thanks a lot

  Read the article

• Ubuntu 12.04.3 64 bit with Nemo 2.0.x no thumbnails

  - by Dr. Szrapnel

  I have strange problem with thumbnails in my Ubuntu machine. I was using Ubuntu with Cinnamon 1.8 from stable ppa and it was good but then Cinnamon 2.0 came out with some broken packages uploaded to stable ppa nad things gone wrong... Anyway after few updates Cinnamon started to work normaly except Nemo - there are no thumbnails at all, only icons. I heve tried purging /.cache/thumbnails and .thumbnails folders but this doesn't work. Next I have changed permissions for those folders - that didn't helped either. Then I've set Nemo as default file manager and desktop handler but with no result. What is weird - when I start Nautilus and open some folder with images then close it and open same folder with Nemo thumbnails appears but when I clean thumbnails directories there are no thumbnails again. It would be great if someone have some solution for this annoying Nemo behavior because I really don't want to resign from Cinnamon. p.s. I have set preview options in Nemo for Always and no bigger files than 4GB so that is not the case.

  Read the article

• Dell Vostro 2420 upgrade to 12.04.1 no wifi

  - by Kane

  I have installed 12.04 on a dell vostro 2420 (previously 11.10) and wifi is gone now but wired network remains. I've reviewed the other questions and tried some stuff but no luck yet. The following is the process so far so hopefully someone can help: After installing 12.04 using the additional drivers utility did not bring up any proprietary drivers and using synaptic on installation then reinstallation of bcmwl-kernel-source and b43-fwcutter does not help bring up any drivers either (tried rebooting after as well) I have made sure in the bios that the wlan is turned on, and it appears the laptop does not have a wireless hardware switch, only the keyboard function shortcut which turns bluetooth on and off on the taskbar but there is no lightup of the wireless function on the laptop itself. Dell does not appear to have any drivers for ubuntu and google does not appear to be much help :( Thanks in advance!

  Read the article

• Ubuntu 12.04.3 - Graphics Driver: Default vs Nvidia 319-recommended vs Nvidia 319-updated

  - by Navraj

  Background: I switched from default driver to Nvidia-319-recommended. I am guessing that this update has caused issues with Keyboard shortcuts, battery status icon disappearing as well as power management issues as speculated by others. Closing laptop lid no longer suspends laptop - It has to be manually done by licking 'suspend' before closing lid. Question: How do you restore the original/default graphics driver? Thanks for your help. Regards

  Read the article

• Ubuntu Server 13.04.3 doesn't boot w/ EFI

  - by user1004816

  I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

  Read the article

• building kernel headers (v3.4) breaks wifi (in Ubuntu 12.04.1 LTS)

  - by iphonedev7

  I have dual-booted by Samsung Series 5 Chromebook into Ubuntu using Jay Lee's script/instructions, and then installed the ~500 updates that appear thereafter. Now, I am trying to build my kernel headers in an attempt to enable virtualization so that I can run VirtualBox (I have a VM image on a flashdrive). I followed the instructions here: https://groups.google.com/forum/?fromgroups=#!topic/chromebook-central/PPQFpC7mYzk mainly doing as olofj suggests in his answer, while also making sure to abide by additions/edits made by panZ and algp. However, now that I have done so, my wifi has stopped working, and when I click on the network icon in the top bar, in place of wifi networks there is a grayed-out message that says "no network devices available". I have an Atheros AR9300 Ethernet card (I think thats what you call it). Any help is much needed and appreciated. Any further details necessary to answer the question will be provided as necessary. Thanks!

  Read the article

• Tri-Boot Win 7 64+Ubuntu 12.04+BackTrack 5

  - by Volchonoc

  I'd like to know what is the best procedure for doing a Tri-boot? I don't want to re-size windows partition I want to re-install it from scratch. I heard that it's better to install windows first, but will windows allow me to create the right partition structure? And what i the best structure? should I create a primary for windows and extended for everything else? If so what should my logicals be: 1)Ubuntu+2)SWAP(shared)+3)BackTrack root+4)BackTrack home, or should I just make 4 primary 1)win+2)Ubuntu+3)BackTrack+4)SWAP. And what are the formats I should choose for Linux partitions? I would appreciate any info on this topic Thank You

  Read the article

• Problem installing from Ubuntu 12.04.1 LTS 32bit cd

  - by John Smith

  Older laptop currently running xp, only 128mb ram too. Is 128 just too small? But, 20+ gigs free hard drive and it's been defragmented. When I try to install Ubuntu from a CD I get the screen that says ubuntu and has the four red dots and then eventually goes blank and I just hear hard drive noises. Stays this way indefinitely (shut it off after half a day). Burned another cd, at slow writing speed too, and dl is from Ubuntu and get same result. Any help much appreciated!

  Read the article

• Ubuntu 12.04.1 LTS breaking down and sluggish

  - by ahamza

  I am in the process of switching from Windows to a Linux based system and am currently deciding between distributions...I am currently trying Ubuntu as WUBI. I find that my experience is not very smooth and streamlined for example, crash-reports, bugs, applications taking time to run etc etc (this in spite of the fact that I am very patient and am constantly researching solution to different driver and application issues). Was wondering if this is because I am running through NTFS right now or is it just like this? Looking to switch to Linux because of its opensource nature, interest in software development in college as well as maximizing the potential of my machine. I am running an AMD quadcore-x64 2.2GHz, 6GB RAM and 750 GB HDD on an HP G6 notebook. I would appreciate any honest opinions.

  Read the article

• C++11 Tidbits: Decltype (Part 2, trailing return type)

  - by Paolo Carlini

  Following on from last tidbit showing how the decltype operator essentially queries the type of an expression, the second part of this overview discusses how decltype can be syntactically combined with auto (itself the subject of the March 2010 tidbit). This combination can be used to specify trailing return types, also known informally as "late specified return types". Leaving aside the technical jargon, a simple example from section 8.3.5 of the C++11 standard usefully introduces this month's topic. Let's consider a template function like: template <class T, class U> ??? foo(T t, U u) { return t + u; } The question is: what should replace the question marks? The problem is that we are dealing with a template, thus we don't know at the outset the types of T and U. Even if they were restricted to be arithmetic builtin types, non-trivial rules in C++ relate the type of the sum to the types of T and U. In the past - in the GNU C++ runtime library too - programmers used to address these situations by way of rather ugly tricks involving __typeof__ which now, with decltype, could be rewritten as: template <class T, class U> decltype((*(T*)0) + (*(U*)0)) foo(T t, U u) { return t + u; } Of course the latter is guaranteed to work only for builtin arithmetic types, eg, '0' must make sense. In short: it's a hack. On the other hand, in C++11 you can use auto: template <class T, class U> auto foo(T t, U u) -> decltype(t + u) { return t + u; } This is much better. It's generic and a construct fully supported by the language. Finally, let's see a real-life example directly taken from the C++11 runtime library as implemented in GCC: template<typename _IteratorL, typename _IteratorR> inline auto operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) -> decltype(__y.base() - __x.base()) { return __y.base() - __x.base(); } By now it should appear be completely straightforward. The availability of trailing return types in C++11 allowed fixing a real bug in the C++98 implementation of this operator (and many similar ones). In GCC, C++98 mode, this operator is: template<typename _IteratorL, typename _IteratorR> inline typename reverse_iterator<_IteratorL>::difference_type operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) { return __y.base() - __x.base(); } This was guaranteed to work well with heterogeneous reverse_iterator types only if difference_type was the same for both types.

  Read the article

• Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

  - by user190488

  It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

  Read the article

• LTS 12.04.1 will not resolve domain.local websites

  - by user108502

  I have done a brand new installation of the Ubuntu server (v12.10) with bind configured to have a dns zone of gdos.local and apache configured for said domain. With a brand new installation of Ubuntu desktop LTS I try to connect to www.gdos.local and all I get is: Server not found Firefox can't find the server at www.gdos.local. Check the address for typing errors such as ww.example.com instead of www.example.com However if I change the domain to gdos.tmp and type in www.gdos.tmp, I get the internal website. If I change it to mybusiness.local , I get the same error message. If I use a Microsoft os, this works fine, all three domains resolve to a webpage. I have searched the internet flat for the past week on dns issues but have not come up with a solution. I have followed instructions from removing dnsmasq to editing like resolv.conf (in some very strange places) and I still have no joy on getting the .local domain extension to work. I can safely say the issue is not with the server but with the desktops because if the issue was server related the Microsoft OS's would not resolve it either. I have done several installs of the desktop in an effort to make sure that I did not break anything while trying to fix this. Please can anyone point to a workable solution for fixing the .local domain extension. Thank you Mark Hollander

  Read the article

• Einstieg in Solaris 11

  - by Stefan Hinker

  Fuer alle die, die jetzt mit Solaris 11 anfangen wollen, gibt es eine gute Zusammenfassung der Neuerungen und Aenderungen gegenueber Solaris 10.  Zu finden als Support Dokument 1313405.1.Auch in OTN gibt es ein ganzes Portal zu Solaris 11.  Besonders hervorheben moechte ich hier die umfangreiche "How-To" Sammlung. Und nicht zuletzt gibt es natuerlich die "ganz normalen" Admin Guides.

  Read the article

• ubuntu booting problem with 12-04

  - by Jazzy

  i installed ubuntu through USB .. instillation was proper. but when i restarted my laptop it dint boot. so planed install it again when started selected install from USB. it booted ma previous installed ubuntu.. so after wen ubuntu boots no need of that pen drive.. so in short .. eveny time i want to start my pc i need that pendrive to boot .. so please help me out this. PS : sorry for the english

  Read the article

• Qt Creator 2.5 est sorti en beta, l'EDI supporte plus de fonctionnalités de C++11

  Suite à la sortie de Qt Creator 2.5 en beta, il est grand temps de faire le tour de quelques nouveautés, sans toutes les passer en revue. C++11 Publié en septembre dernier, le standard ISO C++11 se doit d'avoir un meilleur support dans l'EDI ; notamment, on trouvera les mots-clés nullptr, constexpr, static_assert, noexcept et auto, ainsi que les espaces de noms en ligne et les lambdas (partiellement). De même, quelques nouvelles actions de refactorisation sont disponibles : insertion d'un #include pour les identifiants indéfinis, extraction de fonction, réarrangement de liste de paramètres, synchronisa...

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• No GUI after upgrading from 12.04 to 14.04.1

  - by Kalpit

  Yesterday I upgraded Ubuntu version from 12.04 to 14.04 from update manager. After upgrading it, my system got automatically restarted and now I am not able to switch to GUI mode. Its showing me command prompt mode only. I have tried ctrl + alt + f7 & sudo apt-get install Ubuntu-desktop And all but its not responding. I am newbie in Ubuntu so I don't have much idea that what's going wrong with it. How can I switch to GUI mode now.

  Read the article

• Upgrading to Oracle Enterprise Performance Management Version 11.1.2

  Oracle Enterprise Performance Management Version 11.1.2 offers many great new features for customers upgrading from previous versions of their Hyperion applications. This webcast discusses the benefits of these new features plus the best way to go about planning and implementing the upgrade. AMOSCA, an Oracle Platinum Partner has already completed 15 Oracle EPM upgrades to Version 11.1.x with its customers. Noel Gorvett, Managing Director of AMOSCA shares their experiences of these upgrades to help customers currently considering upgrading to make the best decisions when planning and implementing their upgrade.

  Read the article

• Great Solaris 10 features paving the way to Solaris 11

  - by Larry Wake

  Karoly Vegh writes on the Oracle Systems Blog Austria about what you can do with Solaris 10 today that will get you ready for Solaris 11. Even today, many people still use Solaris 10 as if it were a patch update to Solaris 8 or 9, missing out on the power behind Live Upgrade, Zones, resource management, and ZFS. Learning more about these will help set your feet on the road to the even more sophisticated capabilities of Oracle Solaris 11. [Read More]

  Read the article

• Oracle Solaris 11 pkg fix

  - by Larry Wake

  Bob Netherton explains why Solaris 11 pkg fix is his new friend. "So far so good. Then comes an oops... This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made)." [Read More]

  Read the article

• ???????/???Oracle Solaris 11?????????????????

  - by user788995

  ????? ??:2012/05/14 ??:??????/?? Oracle Solaris 11 ?????????????????????????????????????? IPS????????????Solaris11??????Oracle Solaris ZonesVirtualBox in Solaris 11ZonesAppndix /Oracle Solaris 10?Oracle Solaris 11 ??? ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/D3-03.wmv http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/mp4/D3-03.mp4 http://www.oracle.com/technetwork/jp/ondemand/os-vm/d3-03-dl-1626604-ja.pdf

  Read the article

• ??????????????? ?????? ? ?????????? ??????? IPS ? Solaris 11

  - by Roman Ivanov

  ? ???? ?? ???????? ????? Solaris 11 ? ?? ??? ? ????????? ????? ? ???? ??? ???? ????? ????????? ??? ?????????? ???????? Oracle VM Server for SPARC (aka LDoms). ???? ?? Python/GTK/NetBeans. ?? ?? ??? ???????. ??????? ? ???, ??? ??? ???????????? ????? ? ??????? ????? pylibssh2 ??? ????, ????? ???????????? ?? python ?? ssh ? ????????? ??????.???????? ?? ????? ???????? pylibssh2 ? libssh2, ??????? ? ?????????. ?? ? ???????, ????? ??? ?????? ???? ????????? ? ???? ??????? Solaris IPS. ?????? ? ????? ? ????????? ???????? ??????.????? ?????????, ? ?? ??????? ?????????? ?? ???????????? ? ?????????. ? ???? ????, ??? ????? ????????? configure ? make ??? ??????? ? README ;)???????????? ??????? ????? ???????? ??? ?? ???????????? LD_LIBRARY_PATH. ??? ????? ?? ? ???? ?????? ?? ??????????? ?? ? /etc/profile.? ?? ???? ????? ???????? ????????? ?????? ???. ?? ???????? ????? ?????????? ? ???? ? ?? ?????? ? ????? ?????. ??????????, ???? ???????????? ? ? ????????.????, ??? 0. ????????? ??????????? ? ???? ????? ??????? ??????????. ??? ????? ???????????, ????? ??????? ? ? ???? ???????, ????? ????? ???? ???????? ?????? ?????? ????????. # zfs create rpool/export/repo # zfs set atime=off rpool/export/repo # chown roivanov:staff /export/repo $ pkgrepo create /export/repo $ pkgrepo set -s /export/repo publisher/prefix=tools # pkg set-publisher -g /export/repo tools??? 1, ???????? ?????. ??? ?????? ??????? ? ????????? ? $HOME/Projects/IPS/<??? ??????>, ?? ??? ?? ?????????????. ????? ????, ??? ?????? ??????? ?????? ? ???????? ????????? ????????, ????? ?? ???????????? ????????? ?????????. ??? ?????? ??? ?????????? SunStudio cc ??? gcc. $ export PKGREPO=/export/repo $ mkdir -p $HOME/Projects/IPS/libssh2 $ cd $HOME/Projects/IPS/libssh2 $ export PKGROOT=`pwd` $ unset LDFLAGS $ PATH=$PATH:/opt/solarisstudio12.3/bin $ export CC=cc??? $ export CC=gcc?? ????? ?????? ?????? ?????????? ?????????? (??????????????) ????? ? ../root ?????? /usr $ export DESTDIR=$PKGROOT/root? ????????? ?????????? ../root ? ???? ?????????? ????????? ?????. ????????????? ??????????? ????? ? /usr. $ [ -d root ] && rm -rf root $ cp ~/??????????/libssh2-1.4.2.tar.gz . $ tar xzf libssh2-1.4.2.tar.gz $ cd libssh2-1.4.2? ??????, ???? ????? ?????????? ?????????? ?? /usr/local/lib, ????????????? LDFLAGS ? _????????_ ??? LD_LIBRARY_PATH $ export LDFLAGS="-L/usr/local/lib -R/usr/local/lib" $ ./configure $ gmake && gmake install $ cd ..?????? ?????? Python (pylibssh2) ???????????? ????????? ????? $ python setup.py install --root=../root??? 2. ??????? ???? ? ????????? ?????? $ cat > MANIFEST.files.mog << EOF set name=pkg.fmri value=library/[email protected],0.5.11-11 set name=pkg.description \     value="libssh2 is a client-side C library implementing the SSH2 protocol" set name=pkg.summary value="libssh2 library" set name=maintainer value="First Last <[email protected]>" set name=info.upstream-url value=http://www.libssh2.org/ set name=variant.arch value=$(ARCH) license ../libssh2-1.4.2/COPYING license=BSD <transform dir path=usr$ -> edit group bin sys> EOF ???: library/libssh2 ??? ???????? ??????, 1.4.2 ?????? ??????, 0.5.11 ?????, 11 ????? ?????? ??????. description ??? ????????, ? summary ??? ???????? ???????? ??????. variant.arch ??? ????? ????????? ?????? ?????. ???? ??????????? ? ????? ?????? ????? ????? ??? ?????????? ????????, ?? ??? ? ?????? ???? ?? ????. license ???? ? ??? ???????? transform ????????? ??? ????, ????? ? ????????????? ????? ?????? ???? ????????? ?????????? ?????? ????????? ?????????? /usr ???????? ?????? ?????? ?????? $ pkgsend generate root > MANIFEST.files.1 ????????? ?????????? ?? ????? ???????? ? ?????????? ??????????? ????????? $ pkgmogrify -DARCH=`uname -p` MANIFEST.files.1 MANIFEST.files.mog > MANIFEST.files.2 ??????? ?????? ???? ???????????? $ pkgdepend generate -md root MANIFEST.files.2 | pkgfmt > MANIFEST.files.3 ????????? ?????? ???????? ???????????? ? ?????? ???????. ???? ???? ?????? ????????? ?????. $ pkgdepend resolve -m MANIFEST.files.3 ?? ?????? ???????? ??????? ???? MANIFEST.files.3.res ? ????????? ??????.??? ??????? ????? ????????? ???? ???? ?? ??????? ?????????? ? ?????????? ?????????????,?????? ??? ????? ????? ???????????? ???????????. $ pkglint -c ../lint-cache -r http://pkg.oracle.com/solaris/release/ MANIFEST.files.3.res $ pkglint -c ../lint-cache-local -r /export/repo MANIFEST.files.3.res ? ??????????, ????????? ????? $ pkgsend publish -s $PKGREPO -d `pwd`/root MANIFEST.files.3.res ????????? ?????? ? ?????????? ????????????????? ?????????? ????? ?????? ???? ??????????? $ pkgrepo list -s /export/repo/ ????? ??????? ?????????? ????? ?? ??????????? $ pkgrepo remove -s /export/repo/ [email protected],0.5.11-8:* ????? ?????????? ?????????? ? ?????? ? ??????????? $ pkg info -r libssh2 ????? ?????????? ??? ?????? ?????????, ??? ???????? ????????? ?????? $ sudo pkg install -nv libssh2 ????? ?????????? ????? $ sudo pkg install libssh2 ????? ???????? ????? $ sudo pkg refresh $ sudo pkg update ?????? ??????:[1] How to Create and Publish Packages to an IPS Repository on Oracle Solaris 11,http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-097-create-pkg-ips-524496.html[2] Publishing your own packages with IPS - getting started.https://blogs.oracle.com/barts/entry/publishing_your_own_packages_with[3] How to create your own IPS packages (Ghost Busting)http://blogs.oracle.com/cwb/entry/how_to_create_your_own[4] Introduction to IPS for Developershttp://www.oracle.com/technetwork/systems/hands-on-labs/introduction-to-ips-1534596.html

  Read the article

• About Solaris 11 and UltraSPARC II/III/IV/IV+

  - by nospam(at)example.com (Joerg Moellenkamp)

  I know that I will get the usual amount of comments like "Oh, Jörg ? you can't be negative about Oracle" for this article. However as usual I want to explain the logic behind my reasoning. Yes ? I know that there is a lot of UltraSPARC III, IV and IV+ gear out there. But there are some very basic questions: Does your application you are currently running on this gear stops running just because you can't run Solaris 11 on it? What is the need to upgrade a system already in production to Solaris 11? I have the impression, that some people think that the systems get useless in the moment Oracle releases Solaris 11. I know that Sun sold UltraSPARC IV+ systems until 2009. The Sun SF490 introduced 2004 for example, that was a Sun SF480 with UltraSPARC IV and later with UltraSPARC IV+. And yes, Sun made some speedbumps. At that time the systems of the UltraSPARC III to IV+ generations were supported on Solaris 8, on Solaris 9 and on Solaris 10. However from my perspective we sold them to customers, which weren't able to migrate to Solaris 10 because they used applications not supported on Solaris 9 or who just didn't wanted to migrate to Solaris 10. Believe it or not ? I personally know two customers that migrated core systems to Solaris 10 in ? well 2008/9. This was especially true when the M3000 was announced in 2008 when it closed the darned single socket gap. It may be different at you site, however that's what I remember about that time when talking with customers. At first: Just because there is no Solaris 11 for UltraSPARC III, IV and IV+, it doesn't mean that Solaris 10 will go away anytime soon. I just want to point you to "Expect Lifetime Support - Hardware and Operating Systems". It states about Premier Support:Maintenance and software upgrades are included for Oracle operating systems and Oracle VM for a minimum of eight years from the general availability date.GA for Solaris 10 was in 2005. Plus 8 years ? 2013 ? at minimum. Then you can still opt for 3 years of "Extended Support" ? 2016 ? at minimum. 2016 your systems purchased in 2009 are 7 years old. Even on systems purchased at the very end of the lifetime of that system generation. That are the rules as written in the linked document. I said minimum The actual dates are even further in the future: Premier Support for Solaris 10 ends in 2015, Extended support ends 2018. Sustaining support ? indefinite. You will find this in the document "Oracle Lifetime Support Policy: Oracle Hardware and Operating Systems".So I don't understand when some people write, that Oracle is less protective about hardware investments than Sun. And for hardware it's the same as with Sun: Service 5 years after EOL as part of Premier Support. I would like to write about a different perspective as well: I have to be a little cautious here, because this is going in the roadmap area, so I will mention the public sources here: John Fowler told last year that we have to expect at at least 3x the single thread performance of T3 for T4. We have 8 cores in T4, as stated by Rick Hetherington. Let's assume for a moment that a T4 core will have the performance of a UltraSPARC core (just to simplify math and not to disclosing anything about the performance, all existing SPARC cores are considered equal). So given this pieces of information, you could consolidate 8 V215, 4 or 8 V245, 2 full blown V445,2 full blown 490, 2 full blown M3000 on a single T4 SPARC processor. The Fowler roadmap prezo talked about 4-socket systems with T4. So 32 V215, 16 to 8 V245, 8 fullblown V445, 8 full blown V490, 8 full blown M3000 in a system image. I think you get the idea. That said, most of the systems we are talking about have already amortized and perhaps it's just time to invest in new systems to yield other advantages like reduced space consumptions, like reduced power consumption, like some of the neat features sun4v gives you, and yes ? reduced number of processor licenses for Oracle and less money for Oracle HW/SW support. As much as I dislike it myself that my own UltraSPARC III and UltraSPARC II based systems won't run on Solaris 11 (and I have quite a few of them in my personal lab), I really think that the impact on production environments will be much less than most people think now. By the way: The reason for this move is a quite significant new feature. I will tell you that it was this feature, when it's out. I assume, telling just a word more could lead to much more time to blog.

  Read the article

• 11???OTN?????????????&???? (10/24 ??)

  - by OTN-J Master

  ???????????????????????????????????????????????????????????????????????????? ???11????????????????????????????????????????????????????????????????????????????????????????????11?????????????????????????????????????????Oracle DBA & Developer Day??14?????????????????????????????????????????????????????????????????????????????????????????????????????????!10??????????? ?10/24???????? Oracle Database Appliance??? 11?6?(?)15:30 ~ 17:00 @ ??????????(??????)??????????????????????????????????·?????Oracle Database Appliance????????????????????????????????????????????????Oracle Database Appliance?????·???????????????·??????????????????????????Oracle Database Appliance????????????????? ?????!?????????????????? 11?7?(?)13:30 ~ 17:10 @  ??????????(??????)????????Oracle Database 11g Release2??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????·????????????????????????????? ???Java?3?????!Java?????? 11?12?(?)14:30 ~ 17:30 @  ??????????(??????)????????????????????????????????????·?????????????Java???????????????????Java???????????????????????????????????????????????????????????????????????? ?????????????????Java?????????????????????????????????????Java????????????????????????????? JPOUG Tech Talk Night #3 “Upgrade, Migrate and Consolidate to Oracle Database 12c(?)” 11?12?(?)19:00 ~20:30 @ ??????????(??·???) ???????? JPOUG??????????????????????????US?Oracle ????? 2?????Oracle Database 12c??????????????????????? ???????Oracle OpenWorld?????????????????????? ???????????Web??????????????????????? ??????????????????????????????????! ????! ???????? ~WebLogic Server???????????~ ]?1?] ???????????????11?13?(?)18:30 ~20:00 @ ?????? ????????????(??)?WebLogic Server ??????????????????Java???????????????Java EE??????WebLogic Server?JVM???????????????????????????????????????????????WebLogic Server???????????????????WebLogic Server?????????????????????????????????????11g(10.3.6)????12c(12.1.2)??????????????????????????????? ??????WebLogic Server???????????!Oracle DBA & Developer Day 2013 11?14?(?) @ ???????????(??·???)Oracle Database?Oracle WebLogic Server?Oracle Coherence?Oracle Solaris??????????????????????????????????????1?????????????????????????? ??????????????????????·????????????????????????????????6???????????????· Oracle Database - ???????·???????????????·????· Oracle Database - ??????·??????????· Oracle Database - ??????????· Oracle Database 12c?????? (Oracle University??)· Oracle Fusion Middleware????????· Oracle Solaris?Oracle Hardware????????? ">????!????????????????????????11?19?(?)14:30 ~ 16:50 @ ??????????(??????)??????????????????????????????????????????????????????????????????????????????????????????????????????? ???? ??????????????????????????????????????????????????????????????????????????????????????????????????????????E??????????????????????????????????????????????????????????? ????~!!?????????????????!~????????????~?presented by ???? 11?20?(?)18:30~20:00 @ ?????????? ???? ???????(??)????·??????????????????????????????????????????????????????????????!???????????????Oracle??????????????????????????????????Oracle Database ?????????????????????????????????????????Database Configuration Assitant??????????????????????????????????????????????? ??Oracle Database????????????????????????????????????????Database??(??·???·??????)???????????????????????!?????! ?????????/???????????? 11?21?(?)10:00 ~ 17:30 @ ??????????(??????)?Oracle Application Testing Suite??Web?????????????????????????????????????????????????????????????????????????????????????????????????????????????????Oracle Application Testing Suite?????????????????????????????????????????????????????Oracle Exadata ???? ???? 11?21?(?)13:30 ~ 17:30 @ ??????????(??????)11?28?(?)13:30 ~ 17:30 @ ?????? ????????????(??)?????????????????Oracle Exadata X3 Database In-Memory Machine???·????????????????????????????????????????????????????????????????????Oracle Exadata????????????????????????????????????????????????????????????????? ?! Click??????? in ?? ~90?????! Oracle Database 12c??? & Oracle Database ??????? ~11?22?(?)13:30~16:50 @  ???????? 406???????Oracle Database ??????????????????????????·????????????????????????????? Oracle Database12c ?????90?????????! ???????????? ~Oracle Database 12c ??? ??? ~11?27?(?)18:30 ~20:00 @ ?????????????????(???)Oracle ???????SQL????????????????????????????????????SQL?????????????????????Oracle Database 12c?????????????????????????????????????????????????????????Oracle Database 12c???????????????11g?????????????? ???????????35???? ~??????·??????&Oracle Database?????? ~11?29?(?)13:30 ~16:40 @ RCC?????? 7F 704???(??)?35?????????????????? Oracle?????????????·?????? ?Enterprise Manager???????????????Tips ?????????????????!?????????????????!!

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >